PIPELINER II 609

The Magnatech Pipeliner II is designed to make pipeto- pipe and pipe-to-fitting welds. Interchangeable guide rings mount the head on the pipe, allowing a broad workpiece size range from 168 – 1524 mm (6”– 60”) and larger. The Pipeliner II improves productivity by increasing duty cycle, reducing repair rates, and producing welds of consistent quality.

Generates high quality welds
Simple to understand operation
Can be operated by non-qualified/non-English speaking labor
Extremely rugged design
Push-pull system ensures positive wire feeding

SKU: PIPELINER II 609 Categories: ,

Description

Features

  1. Torch rotation
  2. Filler wire feed
  3. Electronic torch oscillation
  4. Remote torch proximity control (motorized)
  5. Features:
  6. Multipass welding of pipes in all gravity positions
  7. Broad pipe size range
  8. Small stable molten puddle with low spatter
  9. Good penetration characteristics with no “cold lap” lack of fusion defects
  10. Water-cooled uses standard components
  11. “Push-Pull” and Head-mounted wire feeder models available

Application

Multi-pass GMAW/FCAW of pipes, plates & vessels

Pipe Size

Pipe size – 168 mm (6.625”) and larger

Pipe/plate wall thickness

Unlimited

Optional track

Flex track for welding on flat & curved surfaces

Oscillation module (linear)

Oscillation stroke amplitude

0 – 51 mm (2”)

Oscillation speed

0 – 2540 mm/min. (100 ipm)

Oscillation dwell

0 – 1 second. Independently adjustable at both stroke endpoints

Cross seam adjustment

± 25 mm (1.0”)
Oscillation module (pendular) Allows sockets/fillet welding (optional)

Cross seam adjustment

± 20 degrees

Torch vertical motion module

Stroke 66 mm (2.625”) (motorized)
Speed 1520 mm/min. (60 ipm) maximum

Tractor module

Poly-Track® propulsion (patented)

Speed capability

0 – 762 mm/min. (30 ipm). Higher speed motors available

Travel direction

Switch selectable (on head)

Wire

Wire diameter 0.8 – 1.6 mm (0.03 – 0.62”)
Wire feed speed 0.5 – 22 m/min. (20 – 866 ipm)
Wire spool size 15/16 kg (25/33 lbs)

Water-cooled torch

Amperage capability: 300 amps continuous. Uses standard torch components

Cable length

Wire feeder push-pull – 7.6 m (25’) standard

Torch adjustment capability

Torch lead/lag adjustment ± 15 degrees (manual)
Torch tilt adjustment ± 10 degrees (manual)
Angle bracket (optional) ± 45 degrees (manual)

Welding Supply Specialists


Call us on 0151 420 6900